Advice In Learning Keyboard Notes

Though there are some people who can play keyboards and MIDIs by ear, it is still vital to be able to learn how to read keyboard notes. The first few things that you need to learn when it comes to reading keyboard notes are:

  • Find The C Note: The first thing that you have to do is locate the “C” note from the keyboard. Try to find an image or diagram in books or online on where to find it. Remember that this is the first note of the “C” Major scale which starts with “C, D, E, F, G, A, B and then C again”.
  • Take Note Of The Black Keys: Take note that each black key on the keyboard may represent either a C sharp, a D flat or this depends on what key you are playing or chord you are currently toggling with. In order for you to identify the note a particular black key is representing, you go  either with the white key before it which signifies a sharp sign and or the white key after it which represents a flat sign.
  • Find the Octave: Finding the middle C and you can do this by decreasing or increasing the octave number on native instruments keyboard.

These are the first few things that you have to learn if you are interested in playing a keyboard and MIDI.

Tips In Selling A Guitar For A New One

If you want to purchase a new guitar but you find it expensive, you can try selling an old guitar or trading it. If you decide to sell your used electric guitar, keep the following in mind:

Familiarity: It is important that you are intimately familiar with the product you are selling. At least know what model of the guitar that you are selling. Materials that are used to construct the guitar, if the surface of or cover of the guitar is laminated or not are just a few things that you should be familiar about.

Honesty: A lot of people who sells their guitar tend to keep damages and or flaws in the guitar unmentioned. But the thing is that if you would like to give a good impression to your buyers and be reputed as a good seller, it is important that you are honest about damages and flaws apparent in your guitar. If you need to have your guitar repaired then go ahead and do so before selling it. Just make sure that you adjust your price according to the current condition of your guitar.

Music: Guitars are designed to be played with a particular music in mind so make sure that you include it in your selling proposal.

And finally, keep in mind that selling a used guitar will take time but as long as you keep the above statements in mind, you will eventually be able to sell your guitar and buy that fender Starcaster aged cherry burst reissue at musicians friend.

Advantages Of Downloading Music Software

Times have changed and a lot of people are realizing the advantages of downloading music software online.

Shareware: This allows you to try software for free though keep in mind that this is only for a limited amount of time. Now, in case you are interested in keeping the service then you have the option to pay for it. 

Save Cash: Having the option to download music software online helps you save more money as oppose to just purchasing music CDs or DVDs. And even if you purchase music software online and download them, they cost less as compared to purchasing them from your local store. 

Large Selection: Visiting your local software store is another option but then again the selection they offer is limited as compared to what is available online. In fact, you can even order a waves guitar at musicians friend if you want one. One of the advantages of downloading music software online is that you can visit a lot of websites for more options. 

Convenient: Another advantage of downloading music software online is that it saves you the trouble of making an effort in going to your local store. You no longer need to spend for gas or food when you go out since you are at home.

Repairing Your Guitar Amplifier

It is important that when you are trying to repair or troubleshoot your guitar amplifier is that you approach it in a step-by-step procedure.

Examine Power Supply: One of the first things that you have to examine is the power supply and the fuse. Make sure that before you start troubleshooting anything is that everything is already unplugged. The same goes for fuse.

Power: This portion would be easier to examine if the guitar amplifier is not completely working. The first thing that you have to do when checking the power supply is to determine the direct current or DC voltages. You can determine it by searching for a transformer, a big capacitor or rectifier combination. Make sure that you have your tester so you can test the output voltages which should be in the range of 12-0-12 V /0-12V and 42-0-42 /0-80V. The reason for doing this is to figure out if the problem is coming from that portion of the guitar amplifier.

Examine The Capacitors: if there are signs that the capacitors have been burn out or showing that they are charred or blackened. Check the transformer then by utilizing a continuity test of both the primary and secondary rolls. If it is doing well then the next thing that you have to do is to apply main power and test voltage across the secondary rolls. Now, if this portion is functioning then the next thing which needs to be done is to unplug it and move to point six.

Now, if there is no main supply of energy is passing through the secondary coil then you probably need to replace the transformer or perhaps get yourself a new maxon tod9 at musicians friend.

It is important that when you are trying to repair or troubleshoot your guitar amplifier is that you approach it in a step-by-step procedure.

Examine Power Supply: One of the first things that you have to examine is the power supply and the fuse. Make sure that before you start troubleshooting anything is that everything is already unplugged. The same goes for fuse.

Power: This portion would be easier to examine if the guitar amplifier is not completely working. The first thing that you have to do when checking the power supply is to determine the direct current or DC voltages. You can determine it by searching for a transformer, a big capacitor or rectifier combination. Make sure that you have your tester so you can test the output voltages which should be in the range of 12-0-12 V /0-12V and 42-0-42 /0-80V. The reason for doing this is to figure out if the problem is coming from that portion of the guitar amplifier.

Examine The Capacitors: if there are signs that the capacitors have been burn out or showing that they are charred or blackened. Check the transformer then by utilizing a continuity test of both the primary and secondary rolls. If it is doing well then the next thing that you have to do is to apply main power and test voltage across the secondary rolls. Now, if this portion is functioning then the next thing which needs to be done is to unplug it and move to point six.

Now, if there is no main supply of energy is passing through the secondary coil then you probably need to replace the transformer or perhaps get yourself a new maxon tod9 at musicians friend.

Tips When Using A Guitar Pedal

Guitar pedals or often referred to as “guitar effects” are pieces of equipment which changes the way a guitar generates sound. This makes the performance more dramatic and impacting to the audience. By properly connecting the guitar pedals and effectively utilizing them, a guitarist can actually control the volume and equalization as well as the basic aspects of the electric guitar’s tone. The tips below will help you learn how to achieve these results.

  • Pick A Pedal: Most starting guitarists are often advised to go purchase a distortion pedal. This pedal allows a guitarist to be able to change from a clean tone to a distorted tone with just his or her foot. It does not matter if the distortion pedal is a Tech 21 or not as long as it functions well.
  • Power: Most guitar pedals give you the options to either power them up through the use of 9-volt batteries or plug it through an AC adapter using electricity. The only problem though is that it can be a bit inconvenient due to the number of cables lying around. The good thing though is that you do not need to worry about losing power.
  • Plug the Pedal In: Inserting the guitar pedal into the signal path requires a quarter-inch or 6 mm cable coming from the guitar to the input jack on the pedal. What you have to do next is to run the cable through the amplifier’s input jack coming from the output jack of the pedal. Keep in mind that they will continue to consume energy as long as they are connected so make sure that you unplug them when you are done with them.

It is important that you have an idea how to utilize a guitar pedal before purchasing other similar accessories.

How To Motivate Your Child To Learn A Musical Instrument

Would it not be great if your child could learn how to play a musical instrument? Any parent would be proud if their child knows how to play at least one instrument. If you really want your child to take interest in learning how to play a musical instrument then you have to take the following actions into consideration.

  • Be A Good Example: If you are someone who also knows how to play musical instrument then the best way to get your child interested in learning is by performing in front of him or her. If in case you do not know how to play a musical instrument then you may want to bring your child along and watch musical performances together.
  • Exposure: Another way of motivating your child to pick up a musical instrument and learn it is through exposure to music. Try playing calm or instrumental music if your child is still young and as they grow older, have them watch musical performances in theatres, schools and or anything similar. Teach them to appreciate music.
  • Look for Options: Once your child is ready for school, try to encourage him or her to join band or orchestra programs. When he or she steps into higher education, you also have the option of checking for clubs and or similar programs. You can also try looking for musical instructors that you can entrust your kid to.

If for example your child is already interested in learning an instrument, like a percussion instrument which is a good starting point, the next step for you would be to perhaps, purchase affordable percussion instruments at guitar center.

Tips In Setting Up Stage Lights

Performing on stage is not limited to just being good with the instrument that you are playing or with the way you sing. It is also important that you and you have a crew who are able to properly set the lighting on the stage because this can influence the quality of the experience of the audience to whom you are performing for. In order for you to be able to do this correctly, it is important that you consider the following:

Do Your Homework: You cannot expect yourself to be able to set up the lightings on the stage properly if you do not even have any point of reference to get ideas from. And this is where research comes in. Furthermore, the designer should not limit his or her research on shows but should also consider production. It is important that the designer clearly communicates his or her thoughts to the director of the show so as to be able to plan what needs to be done. Knowing what kind of show and production is going to be done is also a factor. Part of this is also knowing where to get stage lights.

Designing: This starts when you already have an idea of what to do or you and the show’s director have agreed on what needs to be done. The main idea here is that the lights should ideally be set up all light locations of the stage but is not a necessity. Having mapped out the entire area can help you get an idea on where to effectively position the lights.

Loading: Always make it a point to be there when you are setting up the lights on the stage. It is important that someone is directing them especially when they are already setting up the safety cables and securing the lights.

Cues: Setting up the lights does not send there. It is also paramount that you are able to properly set up the cues and to ensure that none of the lights are directed towards a performer’s face. It helps when you have an idea where the lights will pop in per segment of the performance

Tips In Setting Up Stage Lights

“With the proper lighting, this girl would be more awesome”

image credits to:

http://gallery.minitokyo.net/

Common Sound Pedals You Need To Know

Guitar pedals are necessary if you want to get the most out of your electric guitar. It is important that you are familiar with the following guitar pedals:

Wah: The best thing about a wah pedal is that by pressing the wah pedal back and forth, you can simulate the human voice. This is usually used to create an extra when you are doing a guitar solo.

Delay:  This pedal allows the guitarist to sustain the sound that his or her guitar is generating. You are also free to set the delay and can even choose to lengthen it or shorten it depending on your needs.

Flanger: A flanger is able to combine to sounds to create a fading or rippling sound. This is often utilized to create sound effects when you are playing clean or if you are taking advantage of some minor distortion effects.

Chorus: If you are looking for a stereo effect then you need a chorus. This gives the audio-effect as if there is more than one guitar playing and helps in thickening the sound generated by your guitar.

Keep in mind that when you are looking to purchase a guitar pedal for your Gibson es 335, you have the option of buying a pedal which is focused on one particular sound and a digital effects board that offers multiple sound options. If you want something more concentrated, then go for a dedicated guitar pedal otherwise you can check out a multiple sound effect board.

Soundproofing Your Studio

Having a recording studio is cool however it is also important that you are considerate to those around you. And for this reason, it is important that you are able to effectively soundproof your studio to keep the music down. Some ways that you can utilize when soundproofing your studio would be:

  • Egg Crate Panels: This is one of most common way of soundproofing your studio. You can use egg cardboard crates and line up across the walls of your studio. However, there are some who do not recommend using egg crates because they are not effective and may even tend to enhance the sounds rather than keep them in.
  • Foam Rubber Panels: These are often designed to look like egg crates and can also be used to cover the walls and ceilings of your studio. The drawback though with these studio foam is that they are flammable and they easily get worn out.
  • Carpet Panels: Keep in mind that this depends on what carpet you are using as a soundproofing tool. Most of the time thick carpets are the ones that make the cut since they are more absorbent of sounds and can also reduce echoes.

If your neighbors do not mind listening to a lot of loud music then you do not necessarily have to worry about soundproofing your studio. However, that will be an unlikely case.